Duracool Conversion Kit DC0026:

(Includes the can tap with a short hose, the conversion fittings, and two cans of Duracool)

(Net weight 6 ounces:
equivalent to 15 ounces of R134a, or 17 ounces of R12)

Duracool Sealer & Recharge Kit DC0010:

(Includes a can of Sealquick, two cans of Duracool, a can tap with a short hose and pressure guage, conversion fittings, protective eyeglasses, oil check strips, and a temperature guage)

Duracool Tune Up & Sealant Kit DC0024:

(Includes a can of SystemSeal, a can of DuraDry, a can of Oil Chill, a can tap with a short hose and pressure guage, conversion fittings, protective eyeglasses, oil check strips, and a temperature guage)

(Each can equivalent to approx. 1 lb. of R134a or R12)

Large or small cylinder of Duracool:

(Net weight 20 lbs., equivalent to a 50 lb. cylinder of R134a;
or indicate if you need a smaller cylinder equivalent to 30 lb. cylinder for recycling machines instead)

Can of Duracool Oil Chill:

This oil is compatible with all mobile air conditioning refrigerants and lubricants. It will not absorb moisture and is the only air conditioning lubricant you need. Low miscibility means that the oil stays in the compressor where it’s required. This product lowers vent temperatures – lowers compressor operating temperatures – one lubricant does it all! Contains an O.E.M. approved ultra violet leak detection dye, as well as two ounces of Duracool along with the lubricant.

Moisture is one of the leading causes of air conditioning system failures. Easy to use Duradry removes moisture from mobile air conditioning systems. Contains two ounces of Duracool along with the moisture remover. Duradry is a must-use companion for SystemSeal below.

Assists in preventing winter loss; ideal for preventative maintenance.
Seals leaks in mobile air conditioning systems and conditions hoses, gaskets, seals and “0” rings. Use this product to seal rubber leaks such as hoses and gaskets; use SystemSeal for leaks in metal parts. Contains two ounces of Duracool along with the sealer. Compatible with all mobile air conditioning refrigerants and lubricants.

Can of Duracool SystemSeal:

Seals troublesome hard to find leaks, even in metal – such as pin-hole leaks in the condensor caused by corrosion. Formulated for sealing leaks in evaporators, condensers, gaskets, “O” rings, metal and rubber hoses. This product should be used in conjuction with DuraDry to ensure that the moisture is completely removes from the system. Contains two ounces of Duracool along with the sealer. Compatible with all mobile air conditioning refrigerants and lubricants.

Low side pressure guage, max 200 psi
Threads into can tapper assembly. 

For checking oil & acidity levels in R134a systems. Contains two disposable testers.